Ruspert coating is a type of surface coating that provides corrosion resistance and enhanced durability to metal surfaces. It is a combination of a base coating and a topcoat, typically consisting of a zinc or zinc-alloy base layer and a ceramic or organic topcoat.The base layer of Ruspert coating i
Hydrogen embrittlement is largely unpredictable, and efforts to avoid it must start at the design stage to determine the characteristics of the part and the subsequent manufacturing process.Avoiding hydrogen generation during manufacturing and hydrogen absorption by fasteners eliminates the risk of
A4 is equivalent to American standard 316L stainless steel and equivalent to my country's 0Cr17Ni12Mo2 stainless steel. 0Cr17Ni12Mo2 austenitic stainless steel is suitable for use in seawater and other media. It is mainly used as a pitting corrosion resistant material. It is used in photography, foo
Zinc-aluminum coated structure:1st metal zinc layerThe second layer of high corrosion resistance chemical film layerThe third layer is made of ceramic materialsThe anti-rust performance of zinc-aluminum coating is different from the general surface treatment of a single material, but the multiplicat
What is a dual hardness drill end screw?The dual-hardness drill tail screw is made of alloy steel, and adopts a segmented heat treatment method to make the bearing part of the screw have stronger toughness, and at the same time make the drill bit and threaded part have greater hardness to achieve st
NSSC550 (13Cr-2Ni-2Mo) is a product of martensitic (M) series stainless steel with high hardness and high corrosion resistance independently developed by Nippon Steel & Sumitomo Metal.Properly quenching and tempering this steel can obtain extremely high strength and hardness of 0.2% yield strength 1
1. Structure of composite screwThe industry usually uses SUS304/316+ high carbon alloy steel alloy steel for welding combination, the combination of composite stainless steel drilling screw has SUS304/316+SCM435/SS4202. Features of composite screwsThe composite stainless steel drill tail screw is a
Typical fastener hydrogen embrittlement occurs in carbon steel and alloy steel materials.The hardness of fasteners is a core parameter. When most standards talk about hydrogen embrittlement, they will point out that the risk of hydrogen embrittlement begins when the hardness exceeds 320HV. Some expe
What is hydrogen embrittlement of fasteners?Hydrogen embrittlement is a very serious problem in the fastener industry, including building fasteners, roofing screws, composite screws, and coated screws. It will change the structure of the material and cause a sharp decline in mechanical properties.Hy
Screw Structure Classification 1. Slotted ordinary screws are mostly used for the connection of smaller parts. It has pan head screws, cylindrical head screws, countersunk head screws and countersunk head screws. Pan-head screws and cylindrical-head screws have high nail head strength, and they are
